Upload a part geometry with its gating already modelled, review it in the viewer, choose a metal and mould, and let the solver simulate the pour.
0projects · 0 completed runs
Recent activityview all →
Ayrton
Projects
Ayrton
Credits
—simulations left
How credits work
One credit is one simulation. It's used when the simulation starts: filling, cooling and solidification together count as one.
Automatic refund if a simulation can't be started on our side. The credit comes straight back and shows up below.
A simulation that starts and then stops early keeps its credit, because the computing time was used. If you think we got it wrong, contact us and we'll look.
Setting up projects, uploading models and choosing materials is always free.
Your account
Name
—
Email
—
Member since
—
History
Date
What
Change
Balance
Loading…
Ayrton
Preparing your model
Ayrton simulates the metal: it fills the space you model, then cools and freezes it. So what you upload should be the poured metal as one solid, meaning the casting plus the gating system that feeds it, drawn at its real size. Get these right and a model goes from upload to simulation without back-and-forth.
The standard model · side view · 257 × 120 × 150 mm · one solid
Start from the standard model
A simple gated plate that meets every requirement below. Open it in your CAD tool to see how the pieces join into a single solid, or upload it to try Ayrton end to end.
Best is the casting and every gating part fused into a single body: Combine / Union / Boolean add in your CAD tool. If the file holds separate bodies that touch or overlap, we fuse them for you. Bodies with a gap between them stay separate, and metal can't cross the gap.
Gating included
Model the full feeding path: sprue, sprue well, runners, ingates, risers and any overflows. We simulate only what you give us, so a bare part has no way for metal to get in.
Metal only
Leave out the mould box, flask and pattern. The mould is generated around your part automatically. For a core, either model the hole it leaves, or include the core as its own solid: we recognise cores and subtract them from the metal, and the viewer lets you confirm which body is which.
Closed and clean
The surface must be watertight: no missing faces, gaps or faces crossing through each other. Run your CAD tool's check geometry before exporting. We stitch seams and close gaps and small holes automatically, but a badly broken surface can't be rebuilt reliably.
Real size
Draw the part at its true dimensions. STEP and IGES files record their units and we convert them automatically, so mm, metres or inches all work, as long as your CAD file's unit setting is correct. After uploading, check the part looks the right size in the viewer.
A flat pouring face
End the sprue (or pouring cup) in a flat face. That face is the inlet where metal enters. We mark it and set the pouring direction when we review your model, so it doesn't matter which way up you draw it.
File formats
STEP (.step, .stp) is preferred, since every major CAD tool exports it. IGES (.iges, .igs) is accepted. Export the solid only, not assemblies, drawings or mesh formats like STL.
Why a model gets sent back
What happened
How to fix it
Casting and gating are separate bodies that don't touch
Close the gap (or Boolean-union them into one solid), then export again.
A face is missing or two faces overlap
Run check geometry in your CAD tool and heal or rebuild the flagged faces.
The model is tiny or enormous in the viewer
The CAD file's unit setting doesn't match how the part was drawn. Fix the document units, then export again.
Only the part, no sprue or runners
Add the gating system you intend to pour with.
A mould box arrived as an extra solid
Set it to Leave out in the viewer's model check, or export without it.
A core was poured as metal, or metal was taken for a core
Set each body's role in the viewer's model check and rebuild.
After you upload
We build the metal volume automatically: bodies are fused, cores subtracted, gaps and holes closed. The viewer's model check shows what was done and lets you correct which body is a core. If a model can't be repaired it says so there, and no credit is used.
Our team reviews it: we mark the inlet face and set the pouring orientation. Until then the model can be viewed and set up, but not run.
You choose the metal and mould and start the simulation. That uses one credit.